Skip to main content

Please note, we do NOT sell race fuel.

My Account
Cart

Center Sump Oil Pan (Hemi Gen3) (31000)

Reg. Price:
$249.95
Sale Price:
$245.00
Save:
$4.95

Gen III Center Sump Oil Pan 6" DEEP

Details:

GEN III 5.7L/6.1L/6.4L CENTER SUMP OIL PAN

Details:

 CENTER SUMP OIL PAN KIT DESIGNED TO WORK WITH MOST ALL A/B/E BODY STOCK FRONT K-MEMBER SUSPENSIONS ON INSTALLATION OF A 6.1L/5.7L/6.4L/7.0L WITH OR WITHOUT VVT ENGINES

FITS 2003-2008 5.7L TRUCK AND CAR ENGINES,2005-2010 6.1L ENGINES, AND ALUMINUM BLOCK NON VVT 7.0/426 ENGINES, 2009-2016 5.7L TRUCK & CAR ENGINES, 2011-2016 6.4L ENGINES

PAN DOES NOT COME WITH OIL PUMP PICKUP, OIL LEVEL TUBE & OIL LEVEL INDICATOR

NOTE: 1-WORKS WITH ALTERKATION FRONT SUSPENSION AND SOME OTHER AFTERMARKET FRONT SUSPENSIONS. AT THIS TIME, THIS PAN WILL NOT WORK WITH CONTROL FREAKS FRONT SUSPENSION (WHICH REQUIRES 32000KIT)

2-MOST APPLICATIONS, REPLACING THE GASKET IS NOT NECESSARY. FACTORY WINDAGE TRAY HAS A PERMA GASKET AFFIXED TO IT. GENERALLY, THOROUGHLY CLEANING OIL RESIDUE FROM WINDAGE TRAY,  OLD SMEAR OF RTV FROM TRAY AND BLOCK IS ALL REQUIRED. DON'T FORGET TO PUT THIN SMEAR OF RTV BACK AT TIMING COVER, AND REAR MAIN SEAL MATING POINTS

3-CENTER SUMP PAN IS ONLY 6" DEEP (SEE ATTACHED ROUGH SKETCH COMPARING FRONT SUMP TO REAR SUMP PANS)

4-ALWAYS CHECK PAN DEPTH AND OIL PICK CLEARANCE, AND ADJUST IF NOT CORRECT. PICKUP SHOULD BE 1/8" FROM BOTTOM OF OIL PAN

5-WORKS WITH 61RA683 OIL LEVEL TUBE, 61RA757 OIL LEVEL INDICATOR, AND 18331 OIL PICKUP (W/O VVT) AND 18341 OIL PICKUP (W/VVT)

6-USE 61R065AA OIL PAN BOLT SET WHEN REMOVING A CAST ALUMINUM OIL PAN AND REPLACING IT WITH THIS PAN OR ANY OTHER SHEETMETAL OIL PAN. THIS BOLT KIT IS 5 MM SHORTER THAN BOLTS USED ON CAST ALUMINUM PANS.

NOTE: WILL NOTE WORK OR FIT ON 6.2L HELL CAT ENGINES

Quantity:
add to cart buy now
Copyright 2019 Bouchillon Performance Engineering. All rights reserved.
This site is best viewed on a laptop or desktop computer.

Please note, we no longer sell race fuel.