|
Part # P5249667AC
426 HEMI CRATE ENGINE
465
HORSEPOWER
486
Ft. Lbs. Torque
Take out your rare number - matching original
HEMI and replace it with the 426 HEMI Crate Engine. Here's classic power to move
you! This HEMI crate engine puts 465 horsepower and 486 Ft. Lbs. of torque under
your right foot. For maximum performance, Mopar Performance recommends the use
of a 750 cfm Holley Carburetor
(P4349228 - available though BPE)
and 2.00" Exhaust Headers. Call For Details Or To Order Any Of the
Part #'s Listed Above In Blue, Needed To Go Along With Your 426HEMI.
Specifications:
* Built with all - new components
* Heavy - Duty Cast Iron Block with cross - bolted mains
* Cast Iron Cylinder Heads
* Chrome Valve Covers
* Breathers
* Stainless Steel 2.25" Intake Valves and 1.94" Exhaust Valves
* Heavy - Duty Single Valve Springs with Dampers
* Premium Material Umbrella - Type Valve Stem Seals
* 278º Hydraulic Camshaft - 0.495" / 0.480" Lift
* Forged Pistons - 4.250" bore, 9.0:1 compression ratio
* Aluminum Dual - Place M1 4-bbl Intake Manifold
* Forged Steel Crankshaft - 3.750" Stroke
* Premium Double Roller Timing Chain and Sprockets
* Front Timing Chain Cover
* 6-Quart Rear Sump Oil Pan (1970-71 B- and E-Body style)
* Spark Plug Wires
* High-Performance Electronic Distributor
* Heavy - Duty Engine Stand and Shipping Crate
Note: 9.0:1 Compression
Ratio allows the use of current high octane premium pump gasoline. Crate engines
that change the emissions performance of the vehicle may not be legal for use on
vehicles regulated for highway use in California and
other states. HorsePower and Torque rating based on test engine. Ratings may
vary on individual engines. Not Legal for sale on pollution - controlled
vehicles or vehicles registered for highway use.
!Also
Call Us For Details On Our SPECIAL LOW, LOW INTERNET ORDER ONLY CRATE ENGINE
PRICING!
Now M.P. & BPE offers these much
needed parts to make your 426-Based original production or crate Hemi Engine
installation easier. Each Part Sold Indivdually. These
products are supplied through Mopar Performance & Are NOT Made by BPE!
FOR ALOT MORE MULTIPLE INSTALLATION PARTS & SETUPS THAT
WILL WORK WITH ALL HEMI'S & M.P. CRATE ENGINES, Simply Follow The List Of Links
On The Left-Hand Side of This Web PAGE.-"BPE Products Are Simply The BEST!"
Contact us by E-mail at:
RB@bouchillonperformance.com
| 
